Parameters

Parameters can be used by DCS missions and plugins to read the internal state of the aircraft.

Parameter Name	Description
TACAN_CHANNEL	Number of the tacan channel, note this is only ever an X channel.
COMM_FREQ	Frequency of the UHF Radio in Hz
RADIO_COMPASS_FREQ	Frequency of the AN/ARN-6 Radio Compass in Hz
AFTERBURNER_STATE	0 for unlit -> 1 for AB lit (note if there is AB failure it will not indicate desired AB only the actual AB state ie unlit)
ENGINE_RPM	0 -> 100, engine rpm in percent
FLAP_STATE	0 -> 1, average position where 0 is flaps retracted and 1 fully extended
GEAR_STATE	0 -> 1, average position where 0 is gear retracted and 1 fully extended
TRANSPONDER_CODE	Transponder Code given for Mode 3 code given as a number, 0 if the IFF is not able to respond (off or in standby).
GUN_MISSILE_SWITCH	Position of the Gun/Missile Switch with positions: MISSILES (0), SAFE (1), UPPER (2),ALL (3), LWR (4), POD (5)
MODE_SELECT_SWITCH	Position of the Mode Selector with positions OFF (0), SIGHT & RADAR (1), MANUAL (2), LABS (3), LABS ALT (4), LADD (5)
ARMAMENT_SELECT_SWITCH	Position of Armament Selector with positions OFF (0), RKTS (1), BOMBS (2), DISP (3), NAPALM (4), SPL STORES (5), INOP/SHRIKE (6), TANK JETT (7), DISP JETT (8), PYLON JETT (9)