Preflight Check

Once in the takeoff area:

  1. Hydraulic pressure gauge selector switch - UTILITY.
  2. Speed brake switch IN, then OFF (center). Check speed brake UP, then move switch to OFF (center) position.
  3. Flaps - INTERMEDIATE.
  4. Takeoff trim - Recheck.
  5. Pitot heat - ON.
  6. Canopy - Closed and locked. Hold switch at CLOSE for an additional 2 or 3 seconds after the CANOPY NOT LOCKED goes out to ensure a tight seal.
  7. Anti-collision light - ON. (As required)